Door Switch: Service and Repair

Removing And Installing Door Contact Switch

Preliminary work
1. Remove door lock.

Removing door contact switch







1. Unscrew fastening screw -arrow 1- and pull the holder and plug upwards -arrow-.







2. Pull the plug out of the holder -arrow A-.







3. Disengage lead from the holder -arrow B- and remove upwards -arrow C-.
4. Lever out fastening clip with a suitable screwdriver -arrow A- and remove the clip and the door contact switch -arrow B-.







Installing door contact switch
1. Install door contact switch in the locking bores -arrow A- and fasten it to the door lock with the fastening clip -arrow B-.







2. Press plug into the holder -arrow A- until it clicks into place.







3. Insert electrical wire -arrow B- and lay it in the guide -arrow C-.
4. Insert the holder and plug into the door lock -arrow- and tighten with the fastening screw -1-.







Subsequent work
1. Install door lock.