Campaign - Window Wash Fluid Concentration
Cayenne19/05 W602
Binder - 9, Electrical
October 7, 2005
W602 - Adding Window Washing Fluid Concentrate (Workshop Campaign)
Vehicle Type:
Cayenne/Cayenne S/Cayenne Turbo
Model Year:
2006 (6)
Concern:
Adding window washing fluid.
Information:
This is to inform you of a voluntary Workshop Campaign on a certain 2006 model year Cayenne (V6), Cayenne S and Cayenne Turbo vehicles. There is the possibility vehicles may not have the correct window washing fluid mixture.
To remedy the situation, fill vehicle with window cleaning concentrate CW 1:100 (phosphate-free)".
Affected vehicles:
A total of 95 U.S. and Canadian vehicles fall within the scope of this Workshop Campaign.
Very Important!
Use the VIN range below as a general guideline. The VIN can be checked in the Porsche e-DCS/WWS for confirmation of an open recall campaign. Refer to Attachment "A" to determine if a particular vehicle is eligible for this recall campaign (or Workshop Campaign). Also, the VIN can be checked via the VRU (Voice Response System) for any open listing.
Not every vehicle in the below listed range may be affected. Use the ranges below as a general guideline. Alternatively, the VIN can be checked in the Porsche e-DCS/WWS for confirmation of an open service action.
The affected Vehicle Identification Numbers are contained in the VIN Ranges.
Date of Introduction:
As of July 1, 2005
Work Procedure:
See Attachment "B"
Time Allowance
Parts Information
Administrative Procedure:
See Attachment "C"
Attachment "A" VIN List
Attachment "B" Work Procedure: Adding window cleaning concentrate "CW 1:100 (phosphate-free)".
1. Adding window cleaning concentrate (250 ml) according to instructions in Owner's Manual 'Washer fluid'.
Note!
Do not enter the Workshop Campaign in the Warranty and Maintenance booklet.
Attachment "C" Administrative Procedure, Workshop Campaign W602
Warranty claims should be submitted via e-DCS
Note:
Always check for open recall status under the appropriate e-DCS menu options.
Affected VINs: See Attachment "A"
Labor Operation: Will be automatically inserted when the damage code is entered.
Time Allowance
Parts Information
References
Disclaimer