Clutch: Specifications

Clutch Specifications

Torque Specifications





Screw in clutch fastening screws in the specified order -1 to 6- in several stages. Tighten each screw by half a turn at a time.

Initial Tightening 20 Nm (15 ft. lbs.)
Final Tightening 90°

Clutch Wear Limits





Clutch Measurement When New* 16 mm
Replace Clutch if the Measured Value is less than oe equal to 8 mm
*Measure clutch wear at one of three clutch adjusters. To do this, measure using material 00000 between adjuster and clutch pressure plate -arrow, inset-