Actuator: Service and Repair
397719 Removing and installing transverse lock servo motorRemoving transverse lock servo motor
Overview Of Transverse Lock Servo Motor:
1. Pull cable plug -1, 2- off the servo motor.
2. Pull off fastening element -arrow- for cable lead and place lead aside.
3. Unscrew four fastening screws -arrows- on the servo motor.
ATTENTION: Emerging oil is harmful to the eyes.
^ Wear personal protective gear (e.g. safety goggles).
Note:
^ Avoid minor oil leaks when removing the servo motor.
4. Place oil collection container underneath.
5. Remove servo motor.
Installing transverse lock servo motor
Overview Of Transverse Lock Servo Motor:
1. Replace sealing ring -arrow- on servo motor.
2. Install servo motor.
3. Screw in four screws -arrows- on servo motor. Tightening torque: 7.5 ftlb.
4. Install fastening element -arrow- for cable lead.
5. Connect cable plug -1, 2- to servo motor.
Subsequent work for servo motor for differential lock
1. Check the oil in the final drive.