Windscreen Wiper

Fault Code 1305

CAN Infotainment

Diagnostic conditions
- Ignition on
- Internal wiper motor control module function test

Possible causes of fault
- CAN Infotainment (faulty)
- CAN Infotainment wires (faulty)

Affected pins
- Wiper motor plug: pin 7 and pin 8

Diagnosis/troubleshooting

NOTE: if there is no incoming signal via CAN Infotainment using several control modules, CAN Infotainment must be checked for open or short circuits. Refer to 'Checking instructions/CAN data bus'. Component Tests and General Diagnostics