Instrument Cluster

Fault Code 1311

CAN Infotainment

Diagnostic conditions
- Ignition on
- Internal function test on instrument cluster/gateway

Possible causes of fault
- No signal/communication (no signal on CAN Infotainment)

Affected pins
Instrument cluster, plug B:
- Pin 31 CAN Infotainment (high)
- Pin 32 CAN Infotainment (low)

Diagnosis/troubleshooting

NOTE: If there is no incoming signal via CAN Infotainment using several control modules, CAN Infotainment must be checked for open or short circuits.

Work Instruction 1: