Operation CHARM: Car repair manuals for everyone.

Instrument Cluster



Fault Code 2054

Transverse lock control module

Diagnostic conditions
- Ignition on
- Internal gateway function test

Possible causes of fault
- No signal/communication (no signal from transverse lock control module on CAN drive)

Affected pins
Instrument cluster, plug B:
- Pin 19 CAN drive (high)
- Pin 20 CAN drive (low)

Diagnosis/troubleshooting

NOTE: If there is no incoming signal via the CAN drive using several control modules, the CAN drive must be checked for open or short circuits.


Work Instruction 1: