Antenna, Radio: Service and Repair

Removing And Installing Radio Antenna

Preliminary work
1. Remove top half of rear spoiler.
2. Remove the left antenna amplifier.

Removing radio antenna












1. Unscrew fastening screw -arrow 1-.
2. Loosen fastening nut -2- and turn the ground strap away to the left -arrow A-.
3. Unscrew fastening screws -arrows 3- and set the radio antenna to one side -arrow B-.







4. Release lock for radio antenna -arrows A- and pull off the connector -arrow B-.
5. Remove radio antenna.

Installing radio antenna







1. Push connector of radio antenna onto the line -arrow A- until the locking lugs of the radio antenna lock -arrows B- engage securely.







2. Position radio antenna in installation position -arrow A- and screw in the fastening screws -arrows 3-, but do not tighten them.
3. Turn ground strap into installation position -arrow B- and secure the ground leads using the fastening screw -arrow 1-. Then tighten the fastening nut -2- and fastening screws -arrows 3-.

Subsequent work
1. Install the left antenna amplifier.
2. Install top half of rear spoiler.