Alarm Horn: Service and Repair

Removing And Installing The Alarm Siren

Technical values







Preliminary work
1. Release the relay carrier in the plenum chamber E-box and lay it aside.

Removing the alarm siren












1. Unscrew fastening screw -arrow 1- and pull the horn aside and upwards -arrow-.







2. Release the plug -arrows A- and pull it off -arrow B-.


Installing the alarm siren







1. Connect the plug to the horn -arrow A- until the lock -B- clicks into place.







2. Tightly screw the horn to the holder using the fastening screw -1-. - Tightening torque: 17 ftlb.

Subsequent work
1. Install the relay carrier in the plenum chamber E-box.