CD Changer: Service and Repair

Removing And Installing CD Changer

Technical values







Preliminary work

INFORMATION: The CD changer is located behind the right rear side-panel lining.

Remove the side-panel lining at rear right.

Removing CD changer

WARNING:
Risk of damage to audio system components
- Remove ignition key and switch off the audio system.
- Observe the requirements for working with optical waveguides.







1. Unscrew the four fastening screws and pull out the carrier with CD changer & amplifier.







2. Undo the six fastening screws, lift out the CD changer and pull forwards.







3. Actuate detent -Arrow 1- -Arrow a- and disconnect plug.
4. Unplug connector -Arrow 2-.

Installing CD changer







1. Position CD changer in the carrier and screw it down with the six fastening screws. - Tightening torque: 4.5 ftlb.







2. Screw down the carrier with CD changer & amplifier. - Tightening torque: 6.5 ftlb.







3. Insert plug -2- until it is felt to engage.
4. Insert optical waveguide plug -1- until it is felt to engage.

Subsequent work
Install the side-panel lining at rear right.