Skid Plate: Service and Repair

WM 108019 Removing and installing engine guard





Information

Overview





Engine cover, complete





Engine cover screws

1 - Engine guard, front
2 - Engine guard
3 - Fastening screw M6
4 - Transverse strut
5 - Fastening nut M6

Removing engine guard

Removing engine guard

1. Remove front engine guard. To do this, loosen the screws -1- at the front and side. Then loosen the rear -2- and front screws -3-.





Front screws

2. Remove rear engine guard. To do this, loosen the fastening screws on the transmission cross member -1- and the screws on the traverse strut -2-.





Rear screws

Installing engine guard

Installing engine guard

1. Install the rear engine guard. To do this, screw in the front fastening screws -2- and rear fastening screws -1-.





2. Tighten front fastening screws -3- and rear fastening screws -2- and -1- - Tightening torque: 6.5 ftlb..