Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

WM 171719 Removing and installing guide for oil dipstick





Preliminary work

Preliminary work

1. Remove throttle body cover. Pull the cover up and off.





Cover over the throttle body

2. Remove Y-shaped pipe.

Removing and installing guide for oil dipstick

Removing and installing guide for oil dipstick





Overview

1. Loosen the 2 fastening screws.





Fastening screws for oil dipstick

2. Pull out oil dipstick.
3. Pull guide tube out of oil pan.
4. Replace O-ring.
5. Insert guide tube into oil pan.
6. Tighten the 2 fastening screws. First position the two screws. Then tighten the upper fastening screw. - Tightening torque: 7.5 ftlb. and then the lower fastening screw - Tightening torque: 7.5 ftlb..

Subsequent work

Subsequent work

1. Reinstall the Y pipe.
2. Reinstall throttle body cover. To do this, press the 4 rubber elements on the ball heads.





Throttle body cover