Parking Lamp: Service and Repair

Removing And Installing Bulb For Parking Light

Preliminary work
1. Remove main headlight.

Removing bulb for parking light

CAUTION:
Risk of short circuit.
- Before removing the headlight, remove ignition key and switch off light switch.







1. Open the two locking bars -1- and remove cap -2-.







2. Pull bulb holder out of the lamp bracket.







3. Remove bulb from holder.

Installing bulb for parking light

CAUTION:
Risk of short circuit.
- Before removing the headlight, remove ignition key and switch off light switch.

INFORMATION: Observe instructions in Bulb table and installation instructions.







1. Press lamp into holder.







2. Push bulb holder into lamp bracket and check that it is seated properly.







3. Position cap -2- and close the two locking bars -1-.

Subsequent work
1. Install main headlight and carry out a function test.