Lighting and Horns: Service and Repair

Removing And Installing Light In Rear-view Mirror

Preliminary work
1. Remove mirror glass.
2. Remove upper mirror housing.

Removing

Removing light in rear-view mirror







1. Push back the plug connection -Arrow A- and remove from the holder -Arrow B-.







2. Release plug connection -Arrow C- and disconnect -Arrows D-.
3. Remove lower mirror housing.
4. Press out light from mirror housing -Arrow-.







Removing light bulb in rearview mirror

ATTENTION:
Risk of short circuit.
- Before removing the bulb in the rearview mirror, take out the ignition key and switch off the light switch.

1. Pull bulb holder from light housing -Arrow A-..







2. Remove bulb from bulb holder -Arrow B-.

Installing

Installing light bulb in rearview mirror
1. Insert bulb into bulb holder -Arrow A-.







NOTE: When inserting bulb holder, ensure that the marking -Arrow C- is opposite the locking tab -Arrow D-.







2. Insert bulb holder into light housing -Arrow B-.

Installing light in rearview mirror
1. Press light into mirror housing -Arrow A- until locking tabs -Arrows B- are felt to engage.







2. Pull line through mirror cover -Arrows-.







3. Install lower mirror housing.
4. Push plug connection together -Arrows A- until the locking lug -Arrow B- is felt to engage.







5. Insert plug connection into holder -Arrow C- until it is felt to engage.

Subsequent work
1. Install upper mirror housing.
2. Install mirror glass.