Parking Assist Distance Sensor: Service and Repair

Removing And Installing Sensor For ParkAssist

Preliminary work
Remove the front or rear apron as required.

Removing sensor for ParkAssist












1. Pull apart retaining tabs -arrows A- and remove sensor -1-.
2. Press detent -arrow a- for connector -2- and pull connector off.

Installing sensor for ParkAssist







1. Push the connector -2- onto the sensor -1- until it engages securely.
2. Insert sensor into the mounting point of the bumper until the retaining tabs on the sensor engage.

Subsequent work
Install the front or rear apron as required.