Removing and Installing Bottom Section For Rear Window Release

Removing And Installing Bottom Section For Rear Window Release

Technical values







Removing bottom section for rear window release







Remove lining for rear lid. Refer to Removing and installing rear lid lining.

1. Release connector -Arrow A- and disconnect plug connection -Arrows B-.







2. Release connector -arrows C- and pull off -arrow D-.







3. Unscrew fastening nuts -1- and remove lower part -arrow-.







Installing bottom section for rear window release

1. Install lower part -arrow- and tighten with fastening nuts -1-. Tightening torque: 6 ftlb.







2. Push together plug connection -Arrows A- until the locking tabs -B- are felt to engage.







3. Push in connector -arrow C- until the locking tabs -arrows D- are felt to engage.