Removing and Installing Cover For Oddments Tray Light

Removing And Installing Cover For Oddments Tray Light

Preliminary work

1. Remove rear cover for centre console. Refer to Removing and installing rear cover for centre console.

Removing cover for oddments tray light







1. Release wire harness -Arrow A-.







2. Open oddments tray -Arrow B-.







3. Unclip cover.
3.1. Insert a screwdriver at the clip connections -2- and lever out the cover -Arrow C-.







4. Remove cover.
4.1. Remove cover -Arrow D- and release electric plug connection -3- ( -Arrow E- ).







Installing cover for oddments tray light







1. Position cover.
1.1. Connect plug connection -Arrow E- and place cover in position -Arrow D-.







1.2. Insert the tabs of the cover into the cut-outs in the trim panel -Arrows F-.







2. Engage clips.
2.1. Use a pointed-nose pliers to grip the locking tab and trim panel and press the locking tab into the clip -2- ( -Arrow C- ).







3. Close oddments tray -Arrow B-.







4. Lay the wire harness -4- ( -Arrow A- ).







Subsequent work

1. Install rear cover for centre console. Refer to Removing and installing rear cover for centre console.