Removing and Installing Rear Cover For Centre Console

Removing And Installing Rear Cover For Centre Console

Technical values







Preliminary work

1. Remove rear centre air jet. Refer to Removing and installing rear centre air jet.

Removing rear cover for centre console







1. Open oddments tray -Arrow A-.







2. Unclip cover for air-conditioning control panel -2- ( -Arrow B- ).







3. Screw out screws at the top -3- and remove them -Arrow C-.







4. Loosen clip connection -4- at the bottom -Arrow D-.







5. Remove cover -1- ( -Arrow E- ).







Installing rear cover for centre console







1. Position cover -Arrow E-.







2. Clip in cover at the bottom -Arrow D-.







3. Insert and screw in screws at the top -3- ( -Arrow C- ) and tighten to the specified tightening torque. Tightening torque: 1.4 Nm (1.0 ftlb.) ± 0.5 Nm (±0.5 ftlb.)







4. Clip in cover for air-conditioning control panel -2- ( -Arrow B- ).







5. Close oddments tray -Arrow A-.







Subsequent work

1. Install rear centre air jet. Refer to Removing and installing rear centre air jet.