Removing and Installing Lumbar Support

Removing And Installing Lumbar Support

Removing lumbar support







1. Remove lumbar adjustment cable.
- Refer to Removing and installing motor for lumbar adjustment.

2. Remove lumbar curvature cable.
- Refer to Removing and installing motor for lumbar adjustment.

INFORMATION: Unclip lumbar support at top first. If the lumbar support is first disengaged at the bottom and turned towards the back, the top clips may break.

3. Using a commercially available screwdriver, lever out lumbar support at the top -arrow-.







4. Fold lumbar support forward.
5. Press holders together -Arrow A- and remove lumbar support from backrest frame -Arrow B-.







Installing lumbar support

1. Engage holders on one side of backrest frame.
2. Push holders on opposite side inwards -Arrow A- and engage on backrest frame -Arrow B-.







3. Fold lumbar support up and push into fastening clips -arrows- until they can be felt to engage.







4. Install lumbar curvature cable.
- Refer to Removing and installing motor for lumbar adjustment.

5. Install lumbar adjustment cable.
- Refer to Removing and installing motor for lumbar adjustment.