Removing and Installing Lock For 1/3-Split Folding Rear Backrest

Removing And Installing Lock For 1/3-split Folding Rear Backrest

Technical values







Removing lock for 1/3-split folding rear backrest







1. Folding rear backrest forward.
2. Remove cover for rear backrest.
2.1. Unclip cover for rear backrest -1- at fastening clips -2- -Arrows A- and pull out to the right -Arrow B-.










3. Remove cover of lock for rear backrest.
3.1. Unscrew fastening screws -4-, -5-.
3.2. Remove cover of lock for rear backrest -3- by pulling it forwards -Arrow C-.










4. Disengage cover piping -7- -Arrow D-.







5. Undo fastening screws -8-.







6. Pull out lock for backrest -6- -Arrow E-.







Installing lock for 1/3-split folding rear backrest







1. Insert lock for backrest -6- -Arrow A-.







2. Screw in fastening screws -8- and tighten to the specified torque. Tightening torque: 20 Nm (15 ftlb.) ± 2 Nm (±1.5 ftlb.)







3. Engage cover piping -7- -Arrow B-.







4. Insert cover of lock for rear backrest -3- -Arrow C-. The release lever guides -9- must engage perfectly in the supports of the locking mechanism -10-.










5. Screw in fastening screws -4-, Tightening torque: 4.5 Nm (3.5 ftlb.) ± 0.5 Nm (±0.5 ftlb.) Screw in fastening screw -5-. Tightening torque: 2.5 Nm (2.0 ftlb.) ± 0.2 Nm (±0.2 ftlb.)










6. Install cover for rear backrest.
6.1. Insert cover for rear backrest -1- -Arrow D- and clip in on the fastening clips -2- -Arrows E-.










7. Fold rear backrest back.