Power Door Lock Switch: Service and Repair

Removing And Installing Central Locking Switch

Removing central locking switch

INFORMATION: Only the central locking switches on the rear switch panels can be removed and installed.

1. Lever out the entire power window switch using a plastic spatula.







2. Push in electric plug -1 and 2- and remove both plugs from power window switch -a-.







3. Use two screwdrivers to press the switch panel housing apart and pull out the switch.







Installing central locking switch

INFORMATION: Only the central locking switches on the rear switch panels can be removed and installed.

1. Insert the switch in the switch panel until it clicks into place.







2. Insert the electrical plug connection in the power window switch until it clicks into place.







3. Position the power window switch in the door trim panel and press it in.







4. Make sure that the power window switch is positioned evenly on the gap.