Removing and Installing Regulator For Rear Seat Heating

Removing And Installing Regulator For Rear Seat Heating

Removing regulator for rear seat heating







1. Carefully unclip the cover using a plastic wedge -arrows-.







2. Unscrew fastening screws -Arrows 1- and remove tray together with retaining bracket -arrow-.







3. Release both connectors -Arrow A- and pull them off -Arrow B-.







4. Release regulator -Arrow A- and remove it on the inside by pulling upwards -Arrow B-.







Installing regulator for rear seat heating

1. Insert regulator from the inside -Arrow A- until locking tabs are felt to engage -Arrow B-.







2. Push in the lock -Arrow A-, then insert the connector -Arrow B- until the locking tab -a- is felt to engage in the opening -b-.







3. Fit tray into the console -arrow- and secure tray and retaining bracket -C- with fastening screws -Arrows 1-.







4. Clip in the cover -arrows- until the locking tabs are felt to engage.