Removing and Installing Control Unit For Garage Door Opener

Removing And Installing Control Unit For Garage Door Opener

Removing control unit for garage door opener







1. Carefully unclip control units -1- at the openings provided -arrows- with a small screwdriver and remove.







2. Pull off connector -1- for control units -2- -arrows- and remove control units -2-.

Installing control unit for garage door opener







1. Push on connector -1- for control units -2- -Arrows A-.
2. Insert control units -2- with electric connecting lines into the assembly openings of the cover -3- in an upwards direction -Arrows B-.







3. Insert control units -1- and press in until the latches -arrows- are felt to engage.