Removing and Installing Air Cushion Motor

723919 Removing And Installing Air Cushion Motor

Preliminary work
Remove front seat.

Removing air cushion motor






1. Unscrew the two fastening screws -1- on the support -2-.






2. Set support -2- with connected motor and air cushion control valve aside.
3. Remove the two tie-wraps -1- on the air cushion motor -2-.






4. Release plug connection -3- -arrow a- and disconnect -arrows B-.
5. Pull off the white hose -4- from the air cushion control valve -arrow C- and remove the air cushion motor -2-.

Installing air cushion motor
1. Position air cushion motor -2- and push on the white hose -4- onto the air cushion control valve -arrow A-.






2. Push the plug connection -3- together -arrows B- until it is felt to engage.

NOTE: Observe hose routing.

Ensure that no hoses are disconnected by the tie-wraps.

3. Secure air cushion motor -2- onto support using two new tie-wraps -1-.
4. Position support -2- with connected motor and air cushion control valve and screw down with the two fastening screws -1-.






Subsequent work
Install front seat.