PCM Individual Memory

PCM Individual Memory

The individual memory allows extended vehicle settings to be made via PCM. These settings are individually assigned to the respective ignition key. Each time the key is inserted in the ignition lock, the stored settings are automatically activated via PCM.

NOTE: Continuous use of the menus of the individual memory is only possible when the ignition is switched on. They are not available when the bus is in non-operational mode.

The following settings are available:
- Daytime running lights on/off
- Afterglow time adjustable from 10 s to 120 s
- Rear wiper automatically on/off (this allows the driver to select whether the rear wiper should execute one wipe cycle when reverse gear is engaged if a wipe cycle was executed on the windshield within the preceding 40 seconds)
- Automatic climate control: Save basic setting (e.g. 73° F. fan set to maximum output and defrost on)
- Unlocking opens all doors or just the driver's door
- Autolock: off, on upon ignition or active after moving off

All settings are accessible via "Set" in the "Individual memory" menu.