Oil Pan, Engine

Screws for upper part of oil pan 13 Nm (9.5 ftlb.)
Check that the molded seal is seated correctly
Screw in and tighten 21 inner Torx(R) screws (T30) M6 x 25
Screws 1-4 must be re-tightened





Screws for lower part of oil pan 13 Nm (9.5 ftlb.)
Check that the seal is seated correctly
Screw in 23 inner Torx(R) screws (T30) M6 x 25
Screws 1, 2, 5 and 6 must be re-tightened