Major Service Maintenance
Major Service Maintenance- Air Filter: Check the air filter condition, and if necessary, replace
- Air filter: Replace filter element
- Axle joints: Check play; visual inspection of the dust boots for damage.
- Battery: Check condition and electrolyte level
- Brake hoses and lines: Visual inspection for damage, routing and corrosion
- Brake system: Visual inspection of the brake pads and brake discs for wear
- Clutch: Check the pedal play and end position
- Coolant hoses: Check condition
- Coolant: Check level and antifreeze
- Diagnosis system: Read fault memory; reset maintenance interval/Read and record range information on R.O.
- Door, lid locks and safety hook of the front lid: Check for secure seating and function properly
- Drive shafts: Visual inspection of the dust boots for leaks and damage
- Engine oil and oil filter: Change
- Exhaust system: Visual inspection for leaks and damage; check mounting and heat shields
- Firewall and cabrio section: Check body drains for debris
- Front and rear running gear: Check the screw connections adjustment points are secure
- Fuel lines and connections: Visual inspection for damage and leaks
- Headlights, All: Check setting
- Horn: Check function
- Parking brake: Check free play of parking brake lever
- PCM system: Check for the latest NAV version and update software if needed (when applicable)
- Pollen filter: Replace filter element
- Radiators and air intakes: Visual inspection for external debris and blockage
- Road Test
- Seat belts: Check function and condition
- Steering gear: Visual inspection of the dust boots for damage
- Tie rod ends: Check play and dust boots
- Tires: Check condition and tire pressure
- Underbody panels: visual inspection for completeness, installation and damage
- Vehicle lighting: Check function
- Vehicle underside and engine compartment: Visual inspection for leaks (oils and fluids) and abrasion (lines and hoses)
- Warning and indicator lights: Check function
- Windshield wiper/washer system, headlight washer: Check fluid level and nozzle settings