612319 Removing and installing rear seal (tension bow)

WM 612319 Removing and installing rear seal (tension bow)

Preliminary work

1. Switch on ignition.
2. Open convertible top to the dimension -X= 50 cm-.





Convertible top service position

3. Switch off the ignition.

Removing rear seal (tension bow)





Installation position of rear seal (tension bow)

1. Pull headliner -1- out of the groove of the tension bow -2-.





Removing rear seal

Installing rear seal (tension bow)





Installation position of rear seal (tension bow)

1. Position rear seal (tension bow) -1- on one side of tension bow -2- and tap gently into place with a plastic hammer.





Installing rear seal

Subsequent work

1. Switch on ignition.
2. Close convertible top and switch off ignition.