Lighting and Horns: Specifications

Bulb Table And Installation Instructions

Bulb table

Use Shape, wattage
Dipped beam for Bi-Xenon headlight Philips, D2S, 35 W
Dipped beam for Bi-Xenon headlight with
cornering light Philips, D2S, 35 W
Auxiliary main beam for Bi-Xenon
headlight H11, 55 W
Auxiliary main beam for Bi-Xenon
headlight with cornering light H7, 55 W
Marker light LED

Right tail light, rear fog light LED
Brake/tail light. LED
Rear tail light, reflector LED
Reversing light HP, 16 W
Number plate light C, 5 W

Direction indicator light, front HP, 24 W
Direction indicator light, rear LED
Direction indicator light, side WY, 5 W

Door warning light W, 5 W
Luggage compartment light K, 10 W
Engine compartment light K, 10 W
Interior light K, 10 W
Reading light 6 W Xenon

Installation instructions

WARNING:
Live components
- Risk of electric shock

- Remove electric charge from component.
- Make sure it does not switch on again.
- Check that there is no electric charge.
- Cover adjacent live parts.

NOTE:
Incorrect handling of bulbs
- Risk of damage to bulbs and the bulb housing

- Switch off ignition and remove ignition key.
- Switch off the relevant loads when changing bulbs.
- Only use bulbs listed in the bulb table.
- Only install clean bulbs that are free of grease.
- Always use a cloth or soft paper when working with bulbs.
- Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.
- In certain states, it is compulsory to carry spare light bulbs.