Rear Seat

726319 Removing And Installing Locking Mechanism For Rear Backrest






Preliminary work
Remove rear backrest.

Removing locking mechanism for rear backrest
1. Press out control button -1- with a screwdriver.






2. Unscrew fastening screws -2- and remove collar -3-.
3. Unscrew fastening screws -1- and remove cover for lock -2-.






4. Remove protection washer -1- (-arrow A-).






5. Press out cover for backrest -2- at the sides with a screwdriver -arrows B-.
6. Fold padding -1- inwards -arrow A-.






7. Press reset spring -2- together -arrows B- and remove upwards.
8. Unclip cover -3-.
9. Unscrew fastening screws -4- and remove lock for backrest -5- by pulling it upwards -arrow C-.

Installing locking mechanism for rear backrest
1. Position lock for backrest -5- on the backrest frame -arrow A- and screw in the fastening screws -4-. Tightening torque -] Tightening torque: 12 Nm (9 ftlb.) ±2 Nm (±1.5)






2. Clip in cover -3-.
3. Press in reset spring -2- until it engages -arrows B- and check lever function.
4. Press connection for backrest cover -2- sideways into the backrest frame with a plastic wedge -arrows A-.






5. Press in protection washer -1- (-arrow A-).
6. Position cover for lock -2- and screw in the fastening screws -1-.






7. Place collar -3- in position and screw in the fastening screws -1-.






8. Press in control button -2-.

Subsequent work
Install rear backrest.