Crankshaft Main Bearing

Crankcase through bolts, items 1-11 M10 x 1.25
M97/70 and 97/70S, M97/76
Initial tightening 15 Nm (11 ftlb.) Observe tightening sequence

Stud, item 12 M10
M97/70 and 97/70S, M97/76
M10 Initial tightening 15 Nm (11 ftlb.) Observe tightening sequence

Crankcase through bolts, items 1-11 M10 x 1.25
M97/70 and M97/70S, M97/76
Torque + torque angle 15 Nm (11 ftlb.) + 210° Observe tightening sequence

Stud, item 12 M10
M97/70 and M97/70S, M97/76
Torque + torque angle 15 Nm (11 ftlb) Observe tightening sequence

Short through bolts, items 13 + 14 M10
M97/70 and M97/70S, M97/76
Initial tightening 15 Nm (11 ftlb.) Observe tightening sequence

Short through bolts, items 13 + 14 M10
M97/70 and M97/70S, M97/76
Torque + torque angle 15 Nm (11 ftlb.) + 110° Observe tightening sequence

Cross bolt connection M8
M97/70 and M97/70S, M97/76
Torque 25 Nm (19 ftlb.)