668919 Removing and installing rear-view mirror
WM 668919 Removing and installing rear-view mirror
Technical values
Removing rear-view mirror
Removing trim panel for mirror triangle
Installation position for mirror triangle trim panel
1. Carefully lever out trim panel for mirror triangle -1- using plastic wedge -Arrow A- and pull upwards -Arrow B-.
Removing trim panel for mirror triangle
2. Press -2- electrical plug connection -Arrow C- and pull off -2- the plug -Arrow D-.
3. Remove trim panel for mirror triangle -1-.
Removing seal for mirror triangle
Installation position of rear-view mirror
1. Pull out seal for mirror triangle from cable cutout opening for door mirror.
Seal for mirror triangle
Disconnecting electrical plug connection
Installation position of rear-view mirror
1. Disconnect the plug connection of the mirror housing -3-.
Disconnecting plug connection
Removing rear-view mirror
Installation position of rear-view mirror
1. Unscrew fastening screws -4- and remove mirror housing -5-.
Removing rear-view mirror
Installing rear-view mirror
Installation position of rear-view mirror
1. Position mirror housing -5- and tighten with M6 fastening screws -4-. Tightening torque => Final tightening: 4 ftlb.
Installing rear-view mirror
Locking electrical plug connection
Installation position of rear-view mirror
1. Connect the plug connection of the mirror housing -3-.
Locking plug connection
Fitting seal for mirror triangle
Installation position of rear-view mirror
1. Stick seal for mirror triangle at cable cutout opening on door mirror to the basic door frame.
Seal for mirror triangle
Installing trim panel for mirror triangle
Installation position for mirror triangle trim panel
1. Lock electrical plug connection -2- until it audibly engages.
Installing trim panel for mirror triangle
2. Hook cover -1- into the door triangle from above -Arrow E- and press into the fastening clips on the underside until it engages audibly -Arrow F-.