619015 Adjusting convertible-top compartment lid

WM 619015 Adjusting convertible-top compartment lid

Technical values





Adjusting convertible-top compartment lid

Adjusting stop for convertible top compartment lid





Installation position of stop for convertible top compartment lid

Adjust stop 1 for the convertible top compartment lid to match the contour of the side panel. The stops 1 come in variants +1 mm to +5 mm as spare parts.
1. Fit stop 1 on the sheetmetal bracket 2 in the water channel of the side panel. Adjust in accordance with joining plan. -> 5000IN Diagram - body gap dimensions





Installing stop for convertible top compartment lid

Adjusting the adjusting eccentric for locating peg





Installation position of adjusting eccentric

1. Position adjusting eccentric on the body and tighten with the fastening nut 1. => Tightening torque: 9.7 Nm (7.0 ftlb.)
2. Adjust upper part of adjusting eccentric 2 to match contour of side panel by screwing lower part of adjusting eccentric 3 in or out in direction of travel. -> 5000IN Diagram - body gap dimensions





Adjusting the adjusting eccentric for locating peg