Adjusting Lid For Convertible Top Compartment

Adjusting Convertible-Top Compartment Lid

Technical values







Adjusting convertible-top compartment lid

Adjusting stop for convertible top compartment lid







Adjust stop 1 for the convertible top compartment lid to match the contour of the side panel. The stops 1 come in variants +1 mm to +5 mm as spare parts.

1. Fit stop 1 on the sheetmetal bracket 2 in the water channel of the side panel. Adjust in accordance with joining plan. Refer to IN Diagram - body gap dimensions.







Adjusting the adjusting eccentric for locating peg







1. Position adjusting eccentric on the body and tighten with the fastening nut 1. Tightening torque: 9.7 Nm (7.0 ftlb.)
2. Adjust upper part of adjusting eccentric 2 to match contour of side panel by screwing lower part of adjusting eccentric 3 in or out in direction of travel. Refer to Diagram - body gap dimensions.