619037 Disassembling and assembling convertible top compartment lid

WM 619037 Disassembling and assembling convertible top compartment lid

Technical values





Preliminary work

-> 6101IN Convertible top service position 6101IN Convertible-top service position

Disassembling convertible-top compartment lid

1. Pull off foam pads 1.





Pulling off foam pads

2. Unscrew locating peg 2from the convertible top compartment lid.





Removing locating peg

3. Unscrew fastening screws 3 from the convertible top compartment lid and remove the inner protective edging 4.





Removing protective edging

4. Remove outer protective edging 5 from the convertible top compartment lid.





Removing protective edging

Assembling convertible-top compartment lid

1. Position outer protective edging 5 on convertible top compartment lid and push into place.





Installing protective edging

2. Position and push inner protective edging 4onto convertible top compartment lid, and tighten with the fastening screws 3. => Tightening torque: 2.8 Nm (2.0 ftlb.)





Inner protective edging

3. Screw locating peg 2into the convertible top compartment lid. => Tightening torque: 9.7 Nm (7.0 ftlb.)





Installing locating peg

4. Remove protective paper from foam pad 1 and stick pad onto the convertible top compartment lid at the places specified.





Installing foam pad

Subsequent work

End service position. -> 6101IN Convertible top service position 6101IN Convertible-top service position