44381900 Removing and installing tyre pressure monitoring system antenna

WM 443819 Removing and installing tyre pressure monitoring system antenna

Technical values





Preliminary work

1. Remove front wheel housing liner (Part A). -> 505619 Removing and installing front wheel housing liner - section on "removing" Service and Repair
2. Remove rear wheel housing liner (Part A). -> 536919 Removing and installing rear wheel housing liner - section on "removing" Service and Repair

Removing tyre pressure monitoring system antenna





Overview of tyre pressure monitoring system antenna

1. Switch off ignition and remove ignition key.
2. Unscrew fastening screw -1-.





Unscrewing fastening screw for tyre pressure monitoring system antenna

3. Pull out antenna for tyre pressure monitoring system from holder -arrow A- and remove.
4. Release connector -arrow a- , pull off, and remove tyre pressure monitoring system antenna.





Pulling plug from antenna of tyre pressure monitoring system

Installing tyre pressure monitoring system antenna





Overview of tyre pressure monitoring system antenna

1. Insert plug until it is felt to engage.





Pushing plug onto antenna of tyre pressure monitoring system

2. Insert antenna of tyre pressure monitoring system into support -arrow A- and secure with fastening screw -1-. => Tightening torque: 1.5 ftlb.





Securing antenna of tyre pressure monitoring system with fastening screw

Subsequent work

1. Install front wheel housing liner (Part A). -> 505619 Removing and installing front wheel housing liner - section on "installing" Service and Repair
2. Install rear wheel housing liner (Part A). -> 536919 Removing and installing rear wheel housing liner - section on "installing" Service and Repair