Removing and Installing Tire Pressure Monitoring System Antenna

WM 443819 Removing and installing tire pressure monitoring system antenna





Preliminary work

Preliminary work
1. Remove front wheel housing liner (Part A).
2. Remove rear wheel housing liner (Part A).

Removing tire pressure monitoring system antenna

Removing antenna for tire pressure monitoring system





Overview of tire pressure monitoring system antenna

1. Switch off ignition and remove ignition key.
2. Unscrew fastening screw -1-.





Unscrewing fastening screw for tire pressure monitoring system antenna

3. Pull out antenna for tire pressure monitoring system from holder -arrow A- and remove.
4. Release connector -arrow a-, pull off, and remove tire pressure monitoring system antenna.





Pulling plug from antenna of tire pressure monitoring system

Installing tire pressure monitoring system antenna

Installing antenna for tire pressure monitoring system





Overview of tire pressure monitoring system antenna

1. Insert plug until it is felt to engage.





Pushing plug onto antenna of tire pressure monitoring system

2. Insert antenna of tire pressure monitoring system into support -arrow A- and secure with fastening screw -1-. --> Tightening torque: 1.5 ftlb.





Securing antenna of tire pressure monitoring system with fastening screw

Subsequent work

Subsequent work
1. Install front wheel housing liner (Part A).
2. Install rear wheel housing liner (Part A).