602819 Removing and Installing Frame For Sunroof

WM 602819 Removing and installing frame for sunroof

Technical values






Removing frame for sunroof

CAUTION

Danger of damage to the seats during the removal and fitting of the sunroof frame.

- Fold the rear seat assembly forward and tip the front seat backrest backwards during the removal and fitting of the sunroof frame.





1. Pull off water drain hoses at the front -2-.





2. Pull off water drain hoses at the rear -3-.









3. Release electric plug connection -5- on drive for sunroof -Arrows A- and pull off.









4. Unscrew the front fastening screws.





5. Unscrew fastening screws -4- at sides of sunroof frame -1-.





6. Remove the sunroof frame with the aid of an assistant and pull it out of the passenger compartment through the rear lid opening.

Installing frame for sunroof





1. Put on frame for sunroof.
1.1. Insert the sliding roof frame -1- with an assistant through the rear lid opening into the passenger compartment.





Information

- The punches have a diameter of 10 mm or 12 mm.

1.2. Position frame for sliding door -1- on the roof frame and attach to the locating bores with punches -6 and 7-.





1.3. Screw in fastening screws -4a, 4b- and -4c to 4e- and tighten so that the frame for the sliding roof can still be moved slightly.













2. Tighten the fastening screws -4- in the sequence shown -4a, 4b- and -4c to 4e-. => Tightening torque: 8 Nm (6 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)









3. Push electric plug connection -5- onto sunroof drive until locking tabs audibly engage.





4. Remove fixing devices.
4.1. Remove punch -6- and -7-.









5. Connect water drain hoses -2- at the front.





6. Connect water drain hoses -3- at the rear.