Removing and Installing Wire Harness For Seat (Folding Sports Bucket Seat)

Removing And Installing Wire Harness For Seat (folding Sports Bucket Seat)

Preliminary work
1. Remove front seat.
2. Remove the side airbag.
3. Remove front seat cushion and partly loosen the seat cover at the side of the seat.
4. Partly loosen the front backrest cover at the inner side of the seat.
5. Mount the front seat on the assembly fixture.

Removing wire harness for seat (folding sports bucket seat)












1. Turn airbag connector socket 90° to the left -arrow A- and remove it from the seat shell -arrow B-.
2. Disconnect airbag connector socket.
2.1. Remove tie-wrap -2- on the airbag connector socket -1-







2.2. Release the connector socket -1- ( -arrows A- ) and remove the two single connectors -3- ( -arrow B- ).







3. Remove the two tie-wraps -1- on the seat shell.
4. Remove wire harness.
4.1. Lift up both pieces of padding -arrows A-
4.2. Unscrew the fastening screw -1- and take off the cover -2- - -arrow B-
4.3. Remove the two tie-wraps -3-.







4.4. Pull the wire harness out of the seat shell and out of the backrest -arrows C-.

Installing wire harness for seat (folding sports bucket seat)
1. Install wire harness.
1.1. Lift up both pieces of padding -arrows A-
1.2. Push the wire harness through the backrest and the seat shell -arrows B- and route it correctly.
1.3. Position the cover -2- ( -arrow C- ) and secure it with the fastening screw -1-. Make sure the line routing is correct.







1.4. Secure the wire harness with two new tie-wraps -3-.







2. Secure the wire harness on the seat shell with two new tie-wraps -1-.
3. Connect airbag connector socket.
3.1. Push the two single connectors -3- into the connector socket -1- ( -arrow- ) until the single connectors engage securely.







3.2. Fit a new tie-wrap -2- on the connector socket -1-.







4. Insert the airbag connector socket into the seat shell -arrow A- and turn it 90° to the right -arrow B-

Subsequent work
1. Secure the front backrest cover at the inner side of the seat.
2. Secure the seat cover at the side of the seat and fit the front seat cushion.
3. Install the side airbag.
4. Install the front seat.