Removing and Installing Front Side Section Trim

Removing And Installing Front Side Section Trim

Technical values







Removing front side section trim

Removing front side section trim panel (driver's side)

1. Remove fuse carrier cover -1- -Arrow A-.







2. Unscrew fastening screws -2- and remove side section trim panel -3- -Arrow B-.

Removing front side section trim panel (passenger's side).

1. Partly loosen carpet -1- at the bottom in the area of the A-pillar -Arrow A-.







2. Unscrew plastic nuts -2- and remove side section trim panel -3- -Arrow B-.

Installing front side section trim

Installing front side section trim panel (passenger's side)

1. Position side section trim panel -3- -Arrow A- and screw down with the plastic nuts -2-.







2. Fasten carpet -1- at the bottom in the area of the A-pillar -Arrow B- Double-sided adhesive tape or suitable adhesive.

Installing front side section trim panel (driver's side)

1. Insert side section trim panel -3- einsetzen -Arrow A- and screw down with the fastening screws -2-. Tightening torque: 2.0 ftlb.







2. Insert the fuse carrier cover -1- with both clips -4- into the lateral side section trim panel -2- and clip in -Arrow B-.