Backup Lamp: Service and Repair

Replacing Light Bulb For Reversing Light

Removing light bulb for reversing light







INFORMATION:
- If the tail light is only removed and installed again, the seal for the tail light can be re-used.
- If the seal for the tail light is damaged, this seal must be replaced.
- If the seal is removed from the light, this seal must be replaced.
- If necessary: Pull off the seal and carefully clean the sealing face with a knife.

1. Pull off the tail light seal and carefully clean the sealing face with a knife, for example.







2. Pull off the two electric connectors -2- and -3- on the light bulb.
3. Unscrew the two fastening screws -4- for the light bulb.
4. Remove light bulb -5- from the tail light.

Installing light bulb for reversing light

INFORMATION:
- If the tail light is only removed and installed again, the seal for the tail light can be re-used.
- If the seal for the tail light is damaged, this seal must be replaced.
- If the seal is removed from the light, this seal must be replaced.
- If necessary: Pull off the seal and carefully clean the sealing face with a knife.







1. Fit light bulb -5- into the tail light.
2. Screw in the two fastening screws -4- for the light bulb.
3. Connect the two electric connectors -2- and -3- to the light bulb and check that they are seated securely.