745319 Removing and installing cover for rear backrest

WM 745319 Removing and installing cover for rear backrest

Tools






Removing cover for rear backrest

Removing cover for 1/3-split folding rear backrest









1. Remove padding for rear backrest. => 745219 Removing and installing padding for rear backrest - section on "Removing"
2. Only for vehicles with seat heating: Push the seat heating wiring harness -2- through the cover to the inside -Arrow C-.





3. Release plug connection -1- -Arrow A- and disconnect -Arrow B-.





4. To remove the cover, cut open the cushion clips 00000 -3- at the positions indicated and in the sequence shown -a to d- using side cutters and remove the cover from the padding. Remove remaining pieces of the cushion clips 00000 -3-.





Removing cover for 2/3-split folding rear backrest





1. Remove padding for 2/3-split folding rear backrest. => 745219 Removing and installing padding for 2/3-split folding backrest - section on "Removing"
2. Push the seat heating wiring harness -2- through the cover to the inside -Arrow C-.









3. Release plug connection -1- ( -Arrow A- ) and disconnect it -Arrow B-.





4. Cut open the cushion clips -3- in the sequence shown -a to d- and at the positions indicated -circle marks- using side cutters and remove the cover -4- from the padding -Arrow D-. Remove remaining pieces of the cushion clips 00000 -3-.










Installing cover for rear backrest

Installing cover for 1/3-split folding rear backrest









1. To install cover: place cover on the padding -Arrow A- and align with the contour of the padding.





2. Fasten cover using the cushion clip pliers NR.130 -5- and new cushion clips 00000 -3- in the order shown -a to c-.









3. Only for vehicles with heated seats: Push plug connection -1- together -Arrows B- until the locking lug is felt to engage -Arrow C-.





4. Push the seat heating wiring harness -2- through the cover to the outside -Arrow D-.





5. Install padding for rear backrest. => 745219 Removing and installing padding for rear backrest - section on "Installing"

Installing cover for 2/3-split folding rear backrest





1. Place cover -4- on the padding -Arrow A- and align with the contour of the padding.





2. Fasten cover -4- to the padding using the cushion clip pliers NR.130 -5- and new cushion clips 00000 -3- in the order shown -a to d-.













3. Only for vehicles with seat heating: push together the plug connection -1- -Arrow B- until the locking tab audibly engages -Arrow C-.









4. Push the seat heating wiring harness -2- through the cover to the outside -Arrow D-.





5. Install padding for 2/3-split folding backrest. => 745219 Removing and installing padding for 2/3-split folding backrest - section on "Installing"