Checking and Topping Up Oil For Final Drive

WM 399035 Checking and topping up oil for four-wheel final drive








Preliminary work for oil for four-wheel final drive

1. Remove engine guard.

Checking oil for four-wheel final drive

Warning:
Risk of scalding from hot oil

- Let the oil cool down

- Wear personal protective gear (goggles, gloves)

Information:
- Vehicle must be horizontal to check oil level in all-wheel final drive.

1. Unscrew oil inspection plug -A- with tool special inserts mod. AB 170.





Oil inspection plug-filler screw

2. The oil level is correct if the oil reaches the lower edge of the inspection window.
3. If this is not the case, top up the oil.
4. Screw in oil inspection plug -A- with new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for the torque wrench: open ring wrench insert a/f 13 + adapter 98-1. - Tightening torque: 26 ftlb.





Tightening to the specified torque

Topping up oil for four-wheel final drive

Warning:
Risk of scalding from hot oil

- Let the oil cool down

- Wear personal protective gear (goggles, gloves)

Information:
- Vehicle must be horizontal in order to fill final drive.

1. Unscrew oil inspection plug -A- with tool special inserts mod. AB 170.





Oil inspection plug-filler screw

Information:
- Use only oil approved by Porsche.

2. Fill with oil using the ATF filling device for filling transmission 161 to the lower edge of inspection plug -A-.
3. Screw in oil inspection plug -A- with new sealing ring. To do this, use the special tool special inserts model AB 170 and accessory for the torque wrench: open ring wrench insert a/f 13 + adapter 98-1. - Tightening torque: 26 ftlb.





Tightening to the specified torque

Subsequent work for oil for four-wheel final drive

1. Fit engine guard.