Operation CHARM: Car repair manuals for everyone.

Fire Suppressor Bottle: Service and Repair


WM 689319 Removing and installing fire extinguisher

Technical values





Removing fire extinguisher





Installation position of fire extinguisher (front seat)

1. Release restraining strap -1- by pressing the button -arrow A-.





Removing fire extinguisher

2. Remove fire extinguisher -2- from the tray -3- ( -arrow B- ).

Removing tray for fire extinguisher

1. Move front seat to the uppermost position.
2. Unscrew fastening screws -1- and remove tray -2- ( -arrows- ).





Removing tray

3. Disassemble tray.





Disassembling tray

3.1. Pull restraining strap -1- out of the lower opening in the tray -2- ( -arrow A- ).
3.2. Pull tray holder -3- out to one side -arrow B-.
3.3. Slide restraining strap -1- completely out of the tray -2- ( -arrow C- ).
4. Loosen wire harness for control panel -1- by opening the tie-wrap -2- on the fire extinguisher holder -3-.





Removing holder

5. Unscrew fastening screws -4- and remove fire extinguisher holder -3- ( -arrow- ).

Installing fire extinguisher

Installing tray for fire extinguisher

Information

- Only for vehicles with air-conditioned comfort seat.

Make sure that the wire harness for the fan is not trapped or damaged.

1. Install fire extinguisher holder.





Installing holder

1.1. Position fire extinguisher holder -3- ( -arrow- ).
1.2. Coat fastening screws -4- with Loctite 243 and tighten them. => Tightening torque: 10 Nm (7.5 ftlb.)
1.3. Secure wire harness for control panel -1- with the tie-wrap -2- on the fire extinguisher holder -3-.
2. Assemble the tray.





Assembling tray

2.1. Pull restraining strap -1- through the upper opening in the tray -2- ( -arrow A- ).
2.2. Slide tray holder -3- through into the restraining strap -1- ( -arrow B- ).
2.3. Slide restraining strap -1- through the lower opening in the tray -2- ( -arrow C- ).
3. Position tray -2- ( -arrows- ) and secure with the fastening screws -1-. => Tightening torque: 10 Nm (7.5 ftlb.)





Installing tray

Installing fire extinguisher

1. Insert fire extinguisher -2- into the tray -3- ( -arrow A- ) and lock it with the restraining strap -1- ( -arrow B- ).





Installing fire extinguisher