Body - Spoiler Kit Retrofit Instructions: Overview

6

32/08 ENU

6658

Aerokit (I-no. XAM)

Mar 16, 2009

Information:
Retrofitting

Model Year:
As of 2009





Note:
The Aerokit (--> Figure 1) consists of two new spoiler lips for The front apron and a fixed spoiler for the rear lid. The standard retracting spoiler and The logo on the rear lid must be removed. The model logo, which must be ordered separately as a replacement part, can be fitted at a new position on the rear lid if necessary.

All ready-primed parts can be painted according to the vehicle's color code.

The components have been tested and approved together. Individual parts cannot be installed.

The Aerokit is also available as a factory installed option for new vehicles by requesting optional equipment "XAM".

CAUTION
Different approach angle compared to standard vehicle

Risk of damage to components

--> Avoid steep ascents, descents or ramps wherever possible.

--> Always drive according to the prevailing driving conditions.

CAUTION
Incorrect and improper use of new accessories

^ Risk of damage to components or to the vehicle

--> Never use the spoiler to push the vehicle.

--> Do not use force when opening and closing the rear lid.

--> Observe specified gap dimensions for new accessories with respect to adjacent components and fit new accessories accordingly.

CAUTION
Cleaning the vehicle

^ Risk of damage to the vehicle, paintwork and components

--> When washing the vehicle in an automatic car wash, check that the spoiler is detected by the light barriers.

--> If in doubt, seek the advice of the operator of the automatic car wash.

-->Only use cleaning agents as listed in the owner's manual.

Information
Please pass this information onto the customer as well.

Parts Info:

987.044.802.09
--> Aerokit -ready-primed-, complete








Parts List:








Working Time:





Disclaimer