942355 Replacing halogen bulb

WM 942355 Replacing halogen bulb

Preliminary work

1. Remove main headlight. -> 94151900 Removing and installing headlights - section on "Removing" 94151900 Removing and installing main headlight

Removing halogen bulb

The halogen bulb can be accessed at the right side of the headlight.

The description refers to the left Xenon headlight.
1. Turn the cover -1- to the left (bayonet lock).





Opening the cover

2. Pull the connector down off the bulb.





Removing bulb

3. Disengage and open the locking clip.
4. Pull the bulb out of the headlight.

Installing halogen bulb

NOTICE

Incorrect handling of bulbs

- Risk of damage to bulbs and the bulb housing

-> Switch off ignition and remove ignition key.
-> Switch off the relevant loads when changing bulbs.
-> Only use bulbs listed in the bulb table.
-> Only install clean bulbs that are free of grease.
-> Always use a cloth or soft paper when working with bulbs.
-> Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.
-> In certain states, it is compulsory to carry spare light bulbs.

1. Fit new bulb into the headlight and clamp securely with the locking clip.





Installing bulb

2. Press in the electric plug until it clicks into place.





Fitting cover

3. Fit the cover -1- (arrows) and turn it clockwise to engage it (bayonet lock).

Subsequent work

1. Install main headlight. -> 94151900 Removing and installing headlights - section on "Installing" 94151900 Removing and installing main headlight