Removing and Installing Wiring Harness For Number Plate Light

Removing And Installing Wiring Harness For Number Plate Light

Preliminary work
Remove the rear apron.


Removing wiring harness for number plate light












1. Remove wiring harness for number plate light from the four holders.







2. Release connectors of both number plate lights -Arrow a- and pull them off.







3. Release connectors of the four sensors for ParkAssist -Arrow a- and pull them off.

Installing wiring harness for number plate light







1. Push connectors onto the four sensors for ParkAssist until they are felt to engage.







2. Push connectors onto both number plate lights until they are felt to engage.







3. Insert wiring harness for number plate light into the four holders.

Subsequent work
Install the rear apron.