Rear Fender Liner: Service and Repair

WM 536919 Removing and installing rear wheel housing liner

Technical values





Preliminary work

Remove rear wheel. -> 440519 Removing and reinstalling wheel - section on "Removing" Removal and Replacement

Removing rear wheel housing liner

Removing heat protection cover





Installation position of rear wheel housing liner

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening nuts -2- and fastening screw -1-.





Removing heat protection cover

2. Take off heat protection cover -3-.

Removing rear wheel housing liner





Installation position of rear wheel housing liner

Information

Fastening nuts cannot be used again following removal.

1. Unscrew fastening screws -1- and fastening nuts -2-.





Removing rear wheel housing liner

2. Remove wheel housing liner -3-.

Installing rear wheel housing liner





Installation location of rear wheel housing liner

1. Insert wheel housing liner -3-.





Installing rear wheel housing liner

2. Screw in fastening screws -1- and tighten to the specified tightening torque=> Final tightening: 1.5 ftlb..
3. Screw on fastening nuts -2- and tighten to the specified tightening torque=> Final tightening: 1 ftlb..

Installing heat protection cover





Installation location of rear wheel housing liner

1. Insert heat protection cover -3-.





Installing heat protection cover

2. Screw on fastening screw -1- and tighten to tightening torque => Tightening torque: 1.5 ftlb..
3. Screw on fastening nuts -2- and tighten to the specified tightening torque=> Tightening torque: 1 ftlb..

Subsequent work

Install rear wheel. -> 440519 Removing and reinstalling wheel - section on "Installing" Removal and Replacement