Power Mirror Motor: Service and Repair

WM 668219 Removing and installing mirror adjusting motor

Preliminary work

Remove mirror glass. -> 667819 Removing and reinstalling mirror glass - section on "Removing" 667819 Removing and installing mirror glass

Removing mirror adjusting motor





Overview of mirror adjusting motor

1. Switch off ignition and remove ignition key.
2. Unscrew the three fastening screws -1- from mirror adjusting motor.





Unscrewing fastening screws from mirror adjusting motor

3. Pull off connector on mirror adjuster motor take off mirror adjusting motor.





Pulling off connector from mirror adjusting motor

Installing mirror adjusting motor

1. Push connector onto mirror adjusting motor until it is felt to engage.





Pushing connector onto the mirror adjusting motor

2. Insert mirror adjusting motor and screw down the three fastening screws -1-.





Screwing down fastening screws on the mirror adjusting motor

3. Switch on ignition and check function of the mirror adjusting motor.

Subsequent work

Install mirror glass. -> 667819 Removing and reinstalling mirror glass - section on "Installing" 667819 Removing and installing mirror glass