Procedures

WM 6101IN Convertible-top service position

Move convertible top to service position





Convertible top in service position

NOTICE

Operation of the hood in service position

- Risk of damage to hood frame and rear window

-> Do not move the hood to the "Close" position by electrical means when in service position.

1. Switch on ignition.
2. Unlock convertible top and raise convertible-top compartment lid to its top position.





Convertible top in service position

3. Switch off ignition and remove ignition key.
4. Disengage strip on cloth covering -1- in a downward direction out of the combination holder -2- at the left and right.





Loosening cloth covering

5. Raise convertible top -1- slightly at the rear -Arrow A-. Press the ball socket of the left and right tension cables -2- out of the ball head of the adjusting piece -3- ( -Arrow B- ).





Releasing tension cables

6. Pull Velcro fastener of the retaining strap -1- off the tension bow and engage it on the centring journal -2- at the front.





Convertible top in service position

Ending convertible top service position

1. Disengage retaining strap -1- at the front at the centring journal -2- and fasten Velcro fastener of retaining strap to the tension bow.





Convertible top in service position

2. Swivel convertible top -1- down slightly at the rear ( -Arrow A- ). Pull tension cables -2- at the left and right through the cloth covering -4- ( -Arrow B- ) and press ball socket in at the adjusting piece -3- ( -Arrow C- ).





Pressing in tension cables

3. Engage strip on cloth covering -1- upwards into the combination holder -2- at the left and right.





Securing cloth covering

4. Switch on ignition and move convertible top electrically to its original position.
5. Switch off the ignition.